Agent-X Synthetic Urine Unpacking and Review

Agent-X synthetic urine is a premixed urine designed to mimic human urine for passing drug tests.

In this review, I’ll unbox the kit, discuss its advantages and disadvantages, and show you how to use it to pass a drug test.

What’s in the kit

Let’s unbox it and see what’s included in the kit.

Urine

The urine here is regular quality, which is good if your urine won’t be tested with UrineCheck 7 or other tests that detect synthetic urine. This urine is suitable for both males and females.

As I mentioned in my review of synthetic urines, low-quality cheap urines can be detected by special tests. That’s why I recommend avoiding them.

The color of the urine is rather pale to me. I suppose this is because they used less powder for mixing this urine to cut costs. However, this color and concentration should be okay for the drug test. I’ll need to verify that with a urine validity test.

For the drug test, you’ll need 1-1.5 oz of urine. The kit contains 3 oz, so it’s enough for 2 tests.

The shelf life of the urine is 2 years. However, if you decide to use it twice, you need to freeze the remaining urine after opening the bottle. This is because bacteria will start to grow and make the urine bad.

Bottle

The bottle is flat, which fits easily in your pants. Some sell round bottles, which are less convenient.

This flat bottle is good, but I prefer other ways to hide fake urine. Putting the bottle in your pants makes it hard to walk and use. To hide this bottle well, you need a stealth leg belt or another sneaking method.

The bottle comes with a temperature strip attached. This helps you check the urine temperature before submitting the sample. Some temperature strips show the wrong temperature, leading to a failed drug test.

I always check with a digital thermometer to ensure accuracy.

In the photo below, the thermometer shows 97.3°F, but the temperature strip shows 100°F. That’s not very accurate, so keep the temperature strip reading over 94°F to be safe.

Cap

The kit has a flip-up spout cap, which is great. This cap is already attached to the bottle, unlike other kits where it’s a separate item.

In the drug test room, most people are nervous, so unscrewing and screwing back the cap can be difficult. It’s easy to spill the urine. With the flip-up spout cap, it’s easy since you can do it with one finger. The cap is tough to open, so it won’t accidentally spill under your clothes.

Heating methods

Agent-X has several cons when it comes to heating methods. It includes a heating pad, which is a common way to keep urine warm for a drug test. This kit includes only one heating pad, but there’s enough urine for two uses, which is strange. You can use this kit only once unless you buy extra heat pads.

The heating pad is a regular one used for warming hands or feet in severe environments. It produces temperatures up to 158°F, which is too much and can overheat the urine. Imagine standing in the drug testing room, taking out the urine bottle, and seeing it’s overheated.

Temporary overheating synthetic urine won’t ruin it, but you need a way to cool it down. You only have 4 minutes to submit the sample, which can be a problem.

Also, 158°F is too hot for your skin and can cause burns. If you hide the urine bottle with the heat pad in your pants, you don’t want to feel extra heat and get burned.

The heat pad doesn’t have an adhesive side. To attach it to the bottle, you need to use the rubber band included in the kit. The rubber band can fall off in your pocket or pants. That’s why I prefer pads with adhesive sides.

This heat pad can keep warmth for up to 10 hours, according to its description. I’d count on 6 hours to be safe. It takes about an hour to warm the urine to 100°F, so if you need to warm it quickly, you should microwave it.

How to use Agent-X synthetic urine to pass drug test

The kit comes with instructions printed on the box. The instructions are not very detailed, so here’s how to use it:

• You can microwave the Agent X container for up to 10 seconds.
• The Agent X temperature must be between 90-100°F.
• Remove the cap before heating for the initial heat.
• If the temperature is still out of range after the first heating, repeat the process.
• If there is no reading on the temperature strip but the bottle feels warm, the product has overheated and must cool.
• Using the enclosed heat pad alone will require about an hour to warm up to the range of 90-100°F.
• Attach the heat pad with a rubber band to the bottle, opposite the temperature strip, to maintain near 100°F for up to six hours.
• The product is reheatable.
• Some settling may occur, so shake the bottle before and after heating.

Conclusion

Agent X is a basic synthetic urine kit that can be used one time. It’s cheap, so if you need to pass a drug test that won’t check for synthetic urine, you can give it a try. However, if the outcome of the drug test is important, like for a life-changing job, I recommend using more reliable options.